Array ( [0] => stdClass Object ( [id] => 1 [company_id] => 33 [image_url] => company-33-e_slider.jpg [image_link] => [image_popup] => 0 [slide_id] => 1 [slide_list_name] => all ) )
  • HOME
  • >
  • NEWS
  • >
  • What is the manufacturing base “Bangkok Enshu Machinery” where Enshu’s main product, vertical machining center is produced?

What is the manufacturing base “Bangkok Enshu Machinery” where Enshu’s main product, vertical machining center is produced?

03/10/2018
Samurai Editorial Department

Enshu (Thailand)

The small machining center “WE30Ve” at Enshu (Thailand) offers comfortable working environment and high efficiency. This news article will introduce BANGKOK ENSHU MACHINERY which produces “WE30Ve”, our main sales product manufactured only in Thailand, by interviewing 2 representatives, Mr. Harada and Mr. Oba.


(Left) Mr. Hiroyuki Harada:He entered Enshu, Ltd. in 1992. In 2003, he worked as a member of starting up BANGKOK ENSHU MACHINERY. Later, he worked as an expatriate in Indonesia and Vietnam. In 2015, he finally fulfilled his long-term goal to work for BANGKOK ENSHU MACHINERY. As a senior manager, he works hard on site management and training successors.

(Right) Mr. Yasuyuki Oba:He entered Enshu, Ltd. in 2006. He worked for developing machining center and specialized machines at machine tool department. He has been assigned in BANGKOK ENSHU MACHINERY since 2013. As a senior manager, his main task is purchasing parts. He works to reduce cost of machines and for site management.


HARADA:We, “BANGKOK ENSHU MACHINERY” was established in 2004 as a manufacturing section of Enshu (Thailand), Ltd. BANGKOK ENSHU MACHINERY mainly does 1) manufacturing of machining centers, 2) system engineering of Enshu (Thailand) sales products and 3) casting processing and its sales for Enshu Japan.

We, “BANGKOK ENSHU MACHINERY” was established in 2004 as a manufacturing section of Enshu (Thailand), Ltd. BANGKOK ENSHU MACHINERY mainly does 1) manufacturing of machining centers, 2) system engineering of Enshu (Thailand) sales products and 3) casting processing and its sales for Enshu Japan.


◆“WE30Ve 2APC Spec” is made in Thailand and also the top sales product there. Your company is the manufacturing site for this product and headquarter must have large expectations on you. What do you think of this point?

WE30Ve 2APC Spec

As a manufacturing site, you can see many “WE30Ve” everywhere.


OBA:Of course, we are excited about it, but at the same time, we have responsibilities to deliver high quality products in a tight deadline to those who choose our products.
Therefore, I try to regularly “confirm,” “contact” and “report” regarding parts procurement of machining centers, which is I’m in charge of, and schedules of development and assembly processes.


HARADA:I’m in charge of controlling production planning of machining center assembly and machine processing products and quality control. Mr. Oba and I brought a unity in the company by having close communication with site staffs and it helped us build good relationship with them. With all the staffs, we would like to satisfy our customers in all aspects including “quality” and “delivery deadlines” in the future.


OBA:In order to actualize “limited time delivery”, it is necessary to increase the ratio of local procurement from local parts suppliers for machining centers and control schedules by mainly GEMBA staffs. From now on, we want to even improve these points.

WE30Ve

Image of “WE30Ve” assembly. We don’t neglect to pay attention to every line process.


◆In addition to building good relationship with your staffs, your big advantage is that Thailand is solely responsible for all production processes of machining centers.

HARADA:Indeed. Regarding “WE30Ve” produced only in Thai factory in particular, we believe that we can provide good service in maintenance to our customers.

OBA:Also, we have parts stock of our machines. We can handle urgent cases of delivering parts.


HARADA:We always work on “Monozukuri (Manufacturing)” while thinking of “what our users would think”. We welcome anyone who is interested in machining center production or thinking of purchasing our products to our factory tours.
Please feel free to contact us.


◆Thank you for today.



Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information

The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information

We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

  • To deliver optimized information to the individual user of the Service.
  • To help improve the quality of the Service by statistical analysis.
  • In response to inquiry in regard to the Service.
  • To conduct questionnaires regarding the Service.
  • To send information regarding campaigns and new products by the Company.
  • Other purposes associated with the abovementioned purposes of use.
About cookies

The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

  • Under Prior Consent of the Individual User Concerned
  • When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
  • When reasonable measures are necessary to defend the rights or property of the Company.
  • When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
  • When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
  • In statistical data in which the disclosure or provision does not identify the user’s identity.
Management of Personal Information
  • The Company will maintain the accuracy of personal information and manage it safely.
  • The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
  • The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.
Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy

The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.

Contact

Please address inquiries regarding the Company’s use of personal information to msato@koasha.co.th

Established October 01, 2021

I have read and agree to the Privacy Policy
Please Wait
NEWS Other News
Contact Us

THAILAND
Office
Tel: +66(0)2-520-5229

SALES
Takabayashi
Mobile: +66(0)81-802-3386
Email: takabayashi@enshu.co.th

Keng
Mobile: +66(0)89-481-5454
Email: sittichai@enshu.co.th
Line ID: Sittichaikupa

SERVICE
Harada
Mobile: +66(0)81-899-0700
Email: harada@enshu.co.th

Vichien
Mobile: +66(0)84-705-0099
Email: vichien@enshu.co.th


INDONESIA
Offce
Tel: +62 21-8550-4104

SALES
Gonda
Mobile: +62 813 1730 3020
Email: gonda@enshu.co.id

Rosalina
Mobile: +62 857 1985 4414
Email: sales@enshu.co.id

SERVICE
Takachi
Mobile: +62 811 9954 021
Email: takachi@enshu.co.id

Arif
Mobile: +62 813 9339 4117
Email: engineering@enshu.co.id

News Categories
Feature
This website uses cookies to improve the convenience of the site. See the cookie policy for details.
In addition, by continuing to use the site, you consent to the use of cookies.