[Exhibited at EMO2021] Takamaz Machinery Europe, the European subsidiary of Takamatsu Machinery, showcased CNC precision lathes such as the new XT-8MY!

01/12/2021

TAKAMAZ MACHINERY EUROPE GmbH

Based in Germany, Takamaz Machinery Europe, the European subsidiary of Takamatsu Machinery, is contributing to manufacturing in France, Spain, Italy, Switzerland, Poland, Czech Republic, and other European countries, with precision CNC lathes as their main item. In this article, we report on the "EMO" show, one of the three major machine tool exhibitions in the world, which we participated in in October, along with the introduction of the machines we exhibited.

One of the world's three major machine tool exhibitions EMO 2021 in Milan, Italy

"EMO2021", one of the world's three major machine tool exhibitions, was held in Milan, Italy in October. At this event, more than 3,500 machines were exhibited from about 700 exhibitors, and the number of visitors reached about 60,000.

EMO MILANO 2021

EMO MILANO 2021
■ Schedule: October 4-9, 2021
■ Venue: Fieramilano Milan, Italy
■ Official website：https://emo-milano.com/en/homepage-4/
■ 2021 results: Over 60,000 visitors from 91 countries, approx. 700 exhibitors from 34 countries

▲ Inside of EMO MILANO 2021 Venue

Exhibitors from outside Italy accounted for 60% of the total booths, and visitors from outside Italy accounted for 30% of the total visitors. Despite the fact that the COVID pandemic is still restricting people’s movement and making the situation difficult worldwide, it was a success as an international event and could be a new start for “post-COVID” in the manufacturing industry including machine tools, robots, and automation systems.

Takamatsu Machinery's precision CNC lathes gathered at the EMO show! XW-130 / XW-30P / XT-6 and the new product XT-8MY were presented.

TAKAMAZ exhibition booth

▲ TAKAMAZ exhibition booth

In addition to the new lathe XT-8MY, a total of four models were on display at the "TAKAMAZ" exhibition booth hall.

XT-８MY / 8-inch　Compact compound CNC lathe

lathe XT-8MY

An 8-inch CNC lathe with a Y-axis that boasts a maximum spindle speed of 4,000 min-1, a maximum machining capacity of φ16, M16 mm, and a high power-tool capacity of up to 12 mountings.

XW-130 / ８-inch Drum type CNC lathe

XW-130 / ８-inch Drum type CNC lathe

A precision CNC lathe equipped with an 8-inch chuck that not only marks the fastest loading time in its class of 6 seconds but also has high power. One that is in high demand in Europe.

XW-30P / 4-inch Gang type CNC lathe

XW-30P / 4-inch Gang type CNC lathe

Equipped with a new-type spindle unit, enables stable mass production machining of small workpieces. CNC lathe equipped with a high-speed loader and a high-functional control system in a compact body.

XT-６ / ６-inch　TAKAMAZ flagship model CNC lathe

XT-６ / ６-inch　TAKAMAZ flagship model CNC lathe

Rapid traverse rate marks the best in its class and can be equipped with 6 power tools. An evolved flagship model lathe with a choice of loading system.

Although we did not have high expectations for this year’s event due to the influence of the pandemic, there were more exhibitors and visitors than we anticipated. Many people came to the TAKAMAZ booth, and we were able to receive specific inquiries and orders. Thank you to everyone who visited us.

▲ Staff of TAKAMAZ and Italian distributor OVERMACH at the venue

If you are interested in the CNC precision lathe "XT-8MY" or any other Takamatsu Machinery products in Germany or Europe, please contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.