It is very important to use and maintain clean grinding oil (coolant) at sites where high-precision parts, molds and tools are manufactured. For such sites, YKT recommends Backwash type coolant equipment from Separator System Industries, a leading manufacturer in this field.

High-performance, eco-friendly coolant equipment that does not require filter replacement

This equipment has two major features.

Feature 1 Backwash type, no filter replacement required

By reverse-flowing the cleaning solution (purifying oil) at a pressure several times higher than that during filtration, the filter element spacings are widened, and the adhering sludge (dirt) is stripped off for cleaning. The stripped dirt is sent to a separate tank, and only the debris is removed, keeping the oil clean. The backwash system allows the filter to be used repeatedly and does not require replacement. Filter replacement is a difficult task for on-site personnel. This eliminates the hassle and the cost of replacement filters.

Feature 2 Filter element that demonstrates high filtration performance

The secret to the extremely high filtration performance of this coolant equipment lies in the filter element. Thousands of special cylindrical filters are attached to a pipe, and the gap between each is as small as 10 microns. In addition, a strong spring inside the core metal constantly applies pressure between the elements to maintain constant accuracy, achieving high filtration performance.

Why do you need high-performance coolant equipment?

While it has the advantage of high performance and backwash type, this equipment is not inexpensive compared to other coolant equipment. Nevertheless, when considered over a long-term span of 5 or 10 years, this equipment is considered to be very beneficial in terms of both performance and cost.

＜Comparison of coolant equipment: What is the difference between reverse- flow type and filter replacement type?>

▲ Highly effective treatment (left: before treatment, right: after treatment)

We handle Rollomatic grinding machines that grind high-precision tools, and it is perfectly matched with these machines. In fact, it is also used by major tool manufacturing companies in Japan and Thailand. It is a coolant equipment that we would like to recommend to companies that pursue high tool precision.

Separator System Industry Co., Ltd.
A Japanese manufacturer that designs, manufactures, and sells coolant and filtration equipment. The company's filtration and purification equipment, which utilize proprietary technologies, are environmentally friendly and highly valued for their good cost performance. In addition to industrial machines, the company also manufactures and sells consumer products (disinfectants and deodorants) that utilize technology developed during research and development.

If you are looking for coolant equipment for tool grinding machines in Thailand, please feel free to contact us using the form below.