Contact Us
Please feel free to contact us via the form below.
Loading...
Dispensing Robot (JANOME)
Variety of adjustment functions are available to achieve precise dispensing. Support a wide range of dispensing application for various workpieces.
"Dispensing robots" are mainly used for the application of adhesives, sealants, and coatings.
Dispensing is required to be precise in applying a specified dosing to a specified area.
JANOME's dispensing robots are equipped with dedicated software. Many functions are pre-installed, so precise work with easy operations are guaranteed.
In addition, auto calibration and various adjustment functions can be installed.
If you are thinking of introducing JANOME's dispensing robots in Thailand, please feel free to contact us.
[Main product lineups and specifications]
JR3000 series ( Desktop robots )
■Enhanced rigidity ensures stable performance at high speeds
■Dramatically reduced vibration when operation stopped in despite of a camera mounted on Z axis. Idle time is reduced by half
■The Z-axis cable is built into the top of the robot, enabling effective use of workspace
■Support fieldbus
■By using I/O-MT, maximum of two external motors can be controlled
■Auto camera calibration and XY axis position adjustment
■Z-axis height adjustment by laser displacement sensor
■Needle adjuster to correct displacement of nozzle tip
■Selection of 3 or 4 axis
JC-3 series (Cartesian Robots)
■All-in-one specification of dedicated controller and robot body
■Built-in dedicated software reduces setup time
■Stepping motors with feedback control are used for the X and Y axis
■Enhanced camera function and automatic calibration function
JS3 (SCARA Robot)
■Able to setup "pick and place" without programming
■Improved productivity by High speed and continuous motion
■Wide axis motion range to reach the rear area
■Easy programming. Interactive input enables direct teaching
JR3000 series ( Desktop robots )
■Enhanced rigidity ensures stable performance at high speeds
■Dramatically reduced vibration when operation stopped in despite of a camera mounted on Z axis. Idle time is reduced by half
■The Z-axis cable is built into the top of the robot, enabling effective use of workspace
■Support fieldbus
■By using I/O-MT, maximum of two external motors can be controlled
■Auto camera calibration and XY axis position adjustment
■Z-axis height adjustment by laser displacement sensor
■Needle adjuster to correct displacement of nozzle tip
■Selection of 3 or 4 axis
JC-3 series (Cartesian Robots)
■All-in-one specification of dedicated controller and robot body
■Built-in dedicated software reduces setup time
■Stepping motors with feedback control are used for the X and Y axis
■Enhanced camera function and automatic calibration function
JS3 (SCARA Robot)
■Able to setup "pick and place" without programming
■Improved productivity by High speed and continuous motion
■Wide axis motion range to reach the rear area
■Easy programming. Interactive input enables direct teaching
