Automatic gate cutting by a Take-out Robot | High-precision equipment and high skilled by Thai technical team to use automation of injection molding

20/09/2022

YUSHIN PRECISION EQUIPMENT (THAILAND) CO., LTD.

The next steps processing after injection molding is often done by human hands. Have you ever been given up by solving manpower shortage and 24-hour operation? Yushin Precision Equipment Co., Ltd. can meet various automation needs by utilizing the know-how of manufacturing plastic molded product Take-out Robots. In Thailand, our engineering team is standing by to provide comprehensive support from planning and design to maintenance. In this article, we will introduce an example of a high-precision automatic gate-cutting system that has proven itself in Thailand.

Automatic gate cutting by a Take-out Robot proposed by Yushin Precision Equipment

After the Take-out Robot takes out the product, it carries the product to the standby cutting plier position and performs gate cutting. The ±0.1mm numerically controlled "posture-controlled cutting plier" repeatedly and accurately performs cutting operations that require severe angle adjustment, just like human hands.

Automatic and stable gate-cutting operations are realized even for parts with severe gate residuals or that are difficult to cut due to large gate openings.

＜Benefits of automatic gate cutting＞
✔︎ Stable cutting accuracy
✔ Shorter cycle time, higher productivity
✔ Labor saving and solving manpower shortage
✔ Prevention of human error

Manual gate cutting allows for complex adjustments, but when it is a continuous operation, the longer it takes, the less accurate it becomes. Another problem is that the finished product level may vary from operator to operator.

Automation using Take-out Robots and posture-controlled cutting pliers solves these problems. A robot gate cutting ensures stable production.

Another feature of our Take-out Robots is their high speed. The cycle time can be shortened, and at the same time, the time required for the operation can be accurately grasped, contributing to enhanced production efficiency.

As a system integrator, we provide consistent support for automation in Thailand

Our Thailand base is staffed by an engineering team (designing: 4 Thai / service: 10 Thai and 1 Japanese) with a wealth of experience.

We will propose the most suitable automated system, taking into consideration the customer's requirements, product features, current cycle time, and production volume. We also provide one-stop support for future maintenance and inspections.

Advantages of Yushin Precision Equipment
◎Ability to design and modify systems in Thailand
◎Components in stock in Thailand
◎Speedy and flexible response
◎Reliable proposal and technical capabilities

For gate cutting systems, we will select and propose the most suitable one from our wide variety of cutting pliers.

In addition, various automation system equipment can be interlocked with Take-out Robots of other companies. We will flexibly respond to requests such as "Want to retrofit to the robot currently using" and "Want to enhance productivity.”

If you are looking for equipment and systems for plastic injection molding factories in Thailand, such as plastic molded products Take-out Robots, automatic stocking equipment, and labor-saving automatic equipment, please contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.