Tokyo Seimitsu Private Show 2023 | Automatic measurement solutions to realize labor and manpower savings in Thailand were gathered!

19/12/2023

Accretech (Thailand) Co., Ltd.

Accretech (Thailand) Co., Ltd. (hereinafter referred to as "Tokyo Seimitsu (Thailand)") held a private show, jointly hosted with TOSEI (Thailand) Co., Ltd. as per last year. The third private show was held for three days from October 25 to 27, 2023, and attracted a record number of approximately 500 visitors. This article introduces the contents of the private show and the highlights of the exhibition.

3 models of measuring instruments recommended by Tokyo Seimitsu (Thailand)

The main theme of this year's exhibition was "Spirit of Measurement -Know measurement, Know manufacture-". We exhibited mainly solutions to help visitors understand the effectiveness of equipment efficiency improvement (OEE) by combining instruments with each other. The following three products were highlighted at our booth.

■ SURFCOM NEX 200
This hybrid measuring machine enables measurement and analysis of surface roughness and contour shape in a single tracing. A wide variety of workpieces enables efficient evaluation of workpieces with undulations, inclines, and R-surfaces, and process efficiency can be expected by improving the drive speed. Measurements that used to be performed individually can be completed in a single trace, contributing to time and manpower savings.

■ RONDCOM NEX 300
This is a roundness measuring machine with automatic centering and CNC arm specifications for fully automatic measurement. In addition, the optional AFD (measuring force control detector) automatically measures the inner and outer diameters of workpieces, and when combined with the XY-axis automatic stage, eliminates the need to replace the workpiece each time it is measured. Programming a single operator to supervise multiple RONDCOMs reduces labor and saves manpower.

■ ViScan *Optional function equipped with XYZAX AXCEL
This non-contact image probe has two functions in one unit, 3D-contact measurement and image measurement, and its main feature is that the sensor part swings. This allows measurement of the surrounding area without moving the workpiece, thereby reducing measurement time. It is possible not only for soft materials such as sheet metal, rubber, and plastic parts, but also for high-speed measurement of workpieces with many holes, which takes time to measure.

▲ Capable of measuring images from various angles

Collaboration solutions with cooperating manufacturers

■FANUC: Robodrill × Runout detection system

FANUC's cutting machine "Robodrill" is equipped with the "ATC Runout Detection System" that detects sudden failures due to chip bite that occurs during tool change. The entire measurement process can be completed in only 0.03 seconds.

■Mitsubishi Electric: "GENESIS64" x Measuring instruments

By linking Mitsubishi Electric's "GENESIS64" with Tokyo Seimitsu's precision measuring instruments, production progress of the entire factory, error status of each processing machine, and quality level can be visualized in real time. This solution aims at centralized quality control and improvement of operation rate.

■Takamatsu Machinery: CNC lathe "XW-60" × Electric micro

The collaboration between the electric micro of Tosei Systems (TOSEI), a subsidiary of Tokyo Seimitsu, and the “XW-60” CNC lathe of Takamatsu Machine enables quick and automatic measurement of the diameter of the workpiece, shortening machining cycle times and achieving excellent productivity.

■Shigiya & SBS: Cylindrical grinder x Balancer x Electric micro

TOSEI's electric micro measures the inside diameter of the workpiece, and the SBS balancer automatically finishes to the size of the set workpiece diameter while controlling the vibration intensity of the grinding wheel. Shigiya's cylindrical grinders are equipped with this system.

■TOSEI (Thailand) Co., Ltd.: Post-process measurement system

"Geometric Dimensional Tolerance" & "Surface Roughness" Seminar attracted many attentions

During the exhibition, a total of 10 seminars were held inviting cooperating manufacturers and experts as lecturers. Among them, the basic course on "Geometric Dimensional Tolerance (GD&T)" and "Surface Roughness" was well received, and the number of customers who attended it exceeded the capacity. The reason why many Thai people, especially those involved in QC (quality control), QA (quality assurance), and designs, attended the seminars may be that there are few opportunities to learn such basics at the site in Thailand.

Responding to the demand for automation and labor-saving in measurement in Thailand

The number of visitors to the exhibition has increased each time it has been held, and the event has received high evaluations from many customers. One of the reasons for this is that more and more companies in the Thai manufacturing industry are working on automation, manpower saving, and work efficiency improvement. The number of exhibitions in Thailand with "measurement" as the main theme is still very small, and it was great to see many QC/QA-related on-site staff came to attend. We would like to continue to develop our business by exploring demand.

If you are looking for various precision measuring instruments in Thailand, or if you have any concern about automating and improving the efficiency of measurement, please contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.