Powder and granule supply/discharge system ‘Double-Link Damper’ employing unique technology

28/03/2024

AISHIN INDUSTRIAL (THAILAND) CO., LTD

Aishin Industrial (Thailand) offers the “Double-Link Damper”, a powder and granule discharge system for smooth discharge of particulate materials from bag filters and cyclones. In this article, we will introduce the unique technology, features, and lineup of this product.

Simple operation and smooth motion extend the life of equipment! Solenoid valves and control panels are cost-effective and energy-saving!

The double-link damper is a system used for the discharge of particulate materials, and is installed to , such as by preventing backflow of air in bag filters and cyclones. Two dampers are used at the end of the pneumatic transport to shut off the air and ensure smooth discharge.

【Features】
・Air shutoff function ensures efficient discharge of powder and fine particles
・Simple operation with two-stage lock function controls the discharge process
・Compared to other products, the compact design makes it ideal for locations where space is limited
・One air actuator smartly opens and closes the upper and lower dampers
・Smooth motion extends the service life of the equipment
・Cost reduction of solenoid valve and control panel
・Smart energy-saving and maintenance-saving design
・Suitable for discharging materials from bag filters and cyclones
・Standard size: 150mm / 200mm / 250mm / 300mm

【Other product lineup】
■ Double-flap damper
Used in a wide range of industries such as batteries, chemical products, and food products as discharge applications for cyclones and dust collectors.

■ Sanitary flap damper
Features a highly sanitary design with a removable valve disc drive unit that can be disassembled and cleaned. Ideal for food and pharmaceutical manufacturing sites.

▲ From the left: during cleaning / after assembled

Unique mechanism with single control saves cost, energy and maintenance

The double-link damper is a unique mechanism in which single cylinder is linked to two-stage upper and lower flap dampers, and alternately opens and closes, saving energy and maintenance.

Based on the standard double-flap damper structure, which has remained unchanged for more than 30 years, it has evolved into a simpler, more cost-effective design. Eliminating expensive machining and complex structures, it can be installed at a more affordable price than double-flap damper.

【Unique technical mechanism】
・Two-way operation of the cylinder
The ability to operate two functions with a single cylinder allows for a compact design and improved space efficiency.

・Single control of solenoid valve
Control that normally requires two solenoid valves can be performed with a single solenoid valve, simplifying the control process and reducing costs.น

・Easier maintenance and cost reduction
Simpler design and more efficient operation reduce control complexity, resulting in cost savings of 20-30% and reduced maintenance costs compared to the existing products.

▲ One cylinder controls the upper and lower two-stages of flap damper

【Dimensions】

If you are looking for particulate material equipment in Thailand, or if you have challenges in feeding or discharging powders and granules, please feel free to contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.