Array ( [0] => stdClass Object ( [id] => 1 [company_id] => 168 [image_url] => company-168-ryokosha-ve1.jpg [image_link] => [image_popup] => 0 [slide_id] => 1 [slide_list_name] => all ) [1] => stdClass Object ( [id] => 1 [company_id] => 168 [image_url] => company-168-ryokosha-ve2.jpg [image_link] => [image_popup] => 0 [slide_id] => 1 [slide_list_name] => all ) [2] => stdClass Object ( [id] => 1 [company_id] => 168 [image_url] => company-168-company-28-company-28-RYOKOSHA-Header-JCM-7000-2.jpg [image_link] => [image_popup] => 0 [slide_id] => 1 [slide_list_name] => all ) )

Testing Machine

Nanoindentation Tester ELIONIX

achieves high data reproducibility by suppressing disturbances in the measurement environment.

1. The only nanoindentation tester with a temperature control mechanism
※It reduces sample and tester thermal expansion to improve data reproducibility.

2. equipped with a high-precision positioning stage that adopts the high-precision stage technology for electron-beam lithography equipment developed in-house
※Positioning hardness tests with 0.1µm steps are possible.

3. anti-vibration mechanism
※equipped with a wedge-shaped stage and an active anti-vibration table、resistant to vibration and enhances data reproducibility.


■main features
・load system
【heavy duty unit】
load range :0.005mN(5μN)~2,000mN(2N)
resolution:5nN
【low load unit】
load range :0.005mN(0.5μN) ~10mN
load range:0.03nN

・indenter displacement measurement system
measuring range :±50μm
resolution:0.3pm
measurement method :optical displacement meter

・indenter berkovich indenter :α=65.03°(diagonal angle 115°)

・external dimensions/installation conditions
tester body:650㎜(W)×650㎜(D)×1200㎜(H)
power supply:single phase 100V/10A
floor vibration:0.5gal p-p or less (less low frequency vibration)

・option (holder)
heating holder:high load unit(maximum heating temperature 250℃)
low load unit(maximum heating temperature180℃)
cooling holder:temperature control range(-30℃~100℃)
resin embedding holder:holder for resin-embedded samples for cross-sectional observation
custom holder:we will design and manufacture according to the sample

・option(measurement)
surface profile test:a function that can acquire the shape of the sample with the indenter and shoot it.useful for samples with a lot of unevenness.

viscoelasticity test: possible to measure the storage modulus(E),loss modulus(E'') and loss factor(tanσ) by applying a load at an arbitrary frequency while the indenter is pressed into the sample with a constant load.also, by using a heating stage together, possible to evaluate the glass transition point(Tg).

softening temperature measurement:possible to measure the softening temperature by increasing the temperature with a heating holder while keeping the indenter in contact with the sample under a constant load.

underwater test: possible to test the hardness of samples immersed in water.

particle strength test:This method involves compressing or crushing microparticles and measuring their strength with a flat indenter.

resistance test:Another advantage of particle strength testing is the ability to measure a conductive particles electrical resistance while compressing it.

Catalog Download


Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information

The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information

We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

  • To deliver optimized information to the individual user of the Service.
  • To help improve the quality of the Service by statistical analysis.
  • In response to inquiry in regard to the Service.
  • To conduct questionnaires regarding the Service.
  • To send information regarding campaigns and new products by the Company.
  • Other purposes associated with the abovementioned purposes of use.
About cookies

The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

  • Under Prior Consent of the Individual User Concerned
  • When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
  • When reasonable measures are necessary to defend the rights or property of the Company.
  • When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
  • When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
  • In statistical data in which the disclosure or provision does not identify the user’s identity.
Management of Personal Information
  • The Company will maintain the accuracy of personal information and manage it safely.
  • The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
  • The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.
Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy

The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.

Contact

Please address inquiries regarding the Company’s use of personal information to msato@koasha.co.th

Established October 01, 2021

I have read and agree to the Privacy Policy
Please Wait
This website uses cookies to improve the convenience of the site. See the cookie policy for details.
In addition, by continuing to use the site, you consent to the use of cookies.